banner

banner
Showing posts with label Hobie Pro Angler 14. Show all posts
Showing posts with label Hobie Pro Angler 14. Show all posts

Saturday, August 16, 2014

Hobie PA14 Rocket Launcher DIY

I love my Pro Angler 14, but I was not a fan of any pre-made crate or homemade one. I also wanted to be able to use a cooler instead of a crate for fish and also to use for storage. I had a few ideas in my head and was set on making some kind of rod holder/rocket launcher that fit into the rear flush rod holders. I searched the internet for picture, how-to's, and ideas and most were huge or so gaudy that it was an eyesore. One blog, The Hobie Life, is where I found the best DIY and went with my version of that.

Here is the final product. I can still store my Wheeleez wheels in the scuppers and my cooler fits perfect too. I made sure to angle the rod holders so my rods would not hit my Yak Attak Visipole mounted on the rear deck. Overall I am sure happy with it and plan on testing it tomorrow. I can store 3 rods and also troll one on each side.









Parts List

8' - 1-1/2" Black ABS Pipe
2 -  1-1/2" 45° Black ABS Elbow
2 - 1-1/2" 90° Black ABS Elbow
2 - 1-1/2" Black ABS Sweep Tee
2 - 1-1/2" to 1-/4" Bushing
2' - 1-1/4" White PVC Pipe 

The bushing and 1-1/4" pipe are to insert into the flush mount rod holders. 1-1/2" is tight, but could be sanded down to fit snug. I also used a section of bungee and brass snap to attach to the padeye to hold the rocket launcher in place.

I cemented all joints and also added #10 Pan Head 1/2" SS screws on each fitting to prevent spinning in the event that the glue let go.

UPDATE:

I have since reconfigured the outside rod holders. I used a 45 degree elbow and a short piece of tubing to hold the rod. I did not glue or screw it but used a #10 SS bolt and cap nut so I can adjust the angle whether I am trolling or dead sticking baits.